![background image](http://html1.mh-extra.com/html/technisat/digity-ci/digity-ci_operating-manual_1069644024.webp)
7 Changing basic programming
7.1 Configuring the programme list
This chapter
describes how you can change the pre-programming as well
as the Favourites list of your receiver to reflect your personal
preferences. This function is also required to sort newly found
programmes into the list after a programme search.
For your information, your receiver is equipped with two
programme lists, the
Favourites List
and the
Total List.
The
Favourites programme list includes all programmes you have
taken into the list by the following procedure. The Total list
includes all programmes.
This chapter also describes how you can delete programmes,
or how you can block access by means of the parental control
function. When calling up the programme list by pressing the
OK
key, the Favourites programme list will be displayed.
When the receiver is in TV mode you can view and change
the list of TV programmes, and you can view and change the
radio programmes in Radio mode.
7.1.1 Calling up the programme list
>
Press
OK
.
The Favourites programme list will be displayed.
(Fig.
7-1)
7.1.2 Adding programmes to the programme list
To add programmes to the programme list selected, proceed
as follows:
>
Press the
red
function key (Category) to open a
selection window that will allow you to switch from the
Favourites list to the Total list. This Total list contains
all available programmes. You can choose to sort the
Total list according to
Providers
or alphabetically
(
ABC...
).
>
Use the
arrow keys up/down
to select a programme
sorting type. (e.g. ABC)
>
Confirm by pressing
OK
.
An alphabetically sorted list will now be displayed.
(Fig. 7-2)
>
Press the
green
function key (Select) to display a
selection window
(Fig. 7-3).
>
Now use the
arrow keys up/down
to select the item
All
, to display all available programmes in the Total
list, or
All new
, to display only the new programmes
found by the last programme search.
24
(Fig. 7-1)
(Fig. 7-2)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 24