7.4 Programme Search
As mentioned previously, your receiver is pre-programmed for
all programmes available on the ASTRA and EUTELSAT
satellites. To receive new programmes, or those of other
satellites, several options are available to carry out a
programme search/scan.
1.Satellite:
All
, to search all satellites selected in the menu LNB
Settings (Point 5.4) for programmes
Satellite
, to scan only the selected satellite for
programmes and bouquets.
2.Transponder:
Select this scan/search function to scan only a specific
transponder of a satellite. This will search for individual resp.
all programmes of a transponder.
3.Manual Search
Use this type of search to search for for specific programmes
for which you have the unique PID numbers available.
When the search has been completed, a display will appear
on your screen, informing you how many programmes were
found and how many of these are new additions.
New programmes will be stored in the
Total List
. You can
then add them to your
Favourites List
as described under
Point 7.1
.
>
To perform a programme search call up the
Main
Menu.
(Fig. 7-7)
>
Use the
arrow keys up/down
to mark the item
Search
.
>
Confirm by pressing
OK
.
The sub-menu
Search
will be displayed.
(Fig. 7-8)
>
Use the
arrow keys up/down
to select the type of
search you wish to perform.
7.4.1 Satellite
Activating this type of search will scan all active satellites
(Point 5.4) and transponders for programmes.
>
Use the
arrow keys up/dow
n to select the menu line
Satellite
.
>
Press
OK
to display the corresponding sub-menu.
(Fig. 7-9)
>
Press
OK
again to open the selection table for the
active satellites.
>
Use the
arrow keys up/down
to mark the menu line
All
, to search all active satellites for programmes, or
mark a specific satellite to search only this satellite for
programmes.
28
(Fig. 7-7)
(Fig. 7-8)
(Fig. 7-9)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 28
