inadvertent interruption of the recording.
Timer operation is indicated by blinking of the control
LED on the display.
Preselect
Your receiver switches itself on at the set time, and
selects the appropriate channel. In contrast to the
VCR setting, all functions of the remote control remain
active, and the unit does not switch off at the end of
the recording.
Note!!!
Please ensure that the information box shows the correct
time. If this is not the case, switch your receiver to ZDF or
any other channel providing standard clock time for at least
30 seconds, to allow the unit to synchronize with the correct
time.
6.13 Video text
6.13.1 Using the video text decoder of your
television set
Where available from the provider, video text will be available
on your TV set. To operate the video text function use the
remote control of your television set. Should you experience
any problems with your television set, such as graphics and
text being superimposed, switch your receiver to
FBAS
mode
(Point 5.3).
6.13.2 Using the internal video text decoder
If your television set is not equipped with an integrated video
text decoder, you can still receive video text, where broadcast
by the provider, through your receiver.
>
Select the programme on which you wish to view
video text information.
>
Press the
red
function key to switch on video text.
(Fig. 6-14)
>
Use the
numeric keys
to enter the video text page
you wish to view. Your input will be displayed in the
upper left corner of the screen.
When you have entered the desired page number, the
receiver will search for the selected page. As not all
pages can be transmitted simultaneously, it may take
a few seconds before your receiver finds the page and
displays it on the TV screen.
All video text providers use page 100 for their
index/list of contents.
>
Press the red resp. green function keys to move
forward resp. backward in the text one page at a time.
>
Press the
Back
key to return to normal operation.
23
(Fig. 6-14)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 23
