background image

7.6 System configuration

This menu item allows you to view the specific unit data.
>

Use the 

arrow keys up/down

to select this line in

the sub-menu 

Settings

.

>

Confirm by pressing 

OK

.

>

Press the 

Menu

key to return to normal operation.

8 Technical Terms

Antenna cable (co-axial cable):

The connecting cable used between antenna and receiver, to
transmit the signal received

Data compression/MPEG-1/MPEG-2:

Using the current television standards (625 lines, and 50 Hz
image repeat frequency) means that a data volume of 216
MBit/s. This would require bandwidths simply not available
with either satellite or terrestrial transmission. Therefore it
was decided to reduce the data volume by using a data com-
pression programme. In Europe, MPEG-2 has been agreed
upon as the international standard for data compression.
MPEG-2 is an expanded version of MPEG-1

DVB:

Digital Video Broadcasting: A universal digital broadcasting
technology used for pictures, graphic images, sound and text,
i.e. for data in any form, and always in every possible quality
suitable to the type of data

DVB-T Receiver:

The signals received by the antenna cannot be processed by
the television set. The signals are processed in the DVB-T
receiver in such a way that an audio-visual (AV) signal is pro-
vided at the receiver’s outputs in a form suitable for the tele-
vision set

Frequency:

A physical measurement indicating the number of waves or
oscillations per second. The unit of measurement is called
Hertz (Hz) 

Channel:

Part of a frequency band which is apportioned according to a
specific allocation procedure. A TV channel consists of two
frequencies, one for the visual content and one for the sound
content. Each channel is designated by means of a numeric
abbreviation (except for those European television channels
in the frequency range 40 - 230 MHz, which have been given
letters of the alphabet as designations).

Modulator:

Switch in the receiver facilitating the connection to the TV set
by means of antenna cable

33

bed_anl_DigiPal 1.qxd  23.01.03  14:42  Seite 33

All manuals and user guides at all-guides.com

Summary of Contents for DigiPal 1







































Reviews: