6.12.2 Manual Programming / changing timer
settings
In addition to EPG timer programming, you can also use
manual programming. To use manual programming, proceed
as follows:
>
Use the
Menu
key to call up the
Main Menu
.
>
Select the line
Timer
and confirm by pressing
OK
.
The menu
Timer
will be displayed
(Fig. 6-15).
>
Press the
yellow
function key (New) to go to timer
programming, in order to programme a new event.
(Fig. 6-16)
>
In order to change an existing timer setting, use the
arrow keys up/down
to highlight this. Press the
yellow
function key (Change) to go to the settings of
the highlighted timer.
In order to programme a setting, proceed as follows:
Source
>
Use the
arrow keys
to select the category
Source
and use the
OK
key to select the desired source (
TV
or
Radio
).
Station/Channel
In this line you should select the TV station providing the
programme which you would like to record:
>
Use the
arrow keys
to select the line
Station
.
>
Confirm by pressing
OK
. A programme list will be
displayed.
Use the
arrow keys
to highlight the desired
programme.
>
Confirm by pressing
OK
.
The highlighted programme will now be added to the
timer menu.
Date
>
Use the
arrow keys
to highlight the category
Date.
>
Use the
numeric keypad
to enter the recording
date.
Start
>
Use the
arrow key right
to highlight the category
Start
.
>
Use the
numeric keypad
to enter the starting time.
Stop
>
Repeat the steps as described under “Start” to enter
the time when the programme stops, or ends.
In order for the unit to cope with all these events, you should
allow a break of at least one minute between the Stop time of
a timer and the Start time of the following timer!
23
(Fig. 6-15)
(Fig. 6-16)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 23
All manuals and user guides at all-guides.com