TechniSat DigiPal 1, Operating Manual, Page: 26 / 38

> Press the
green
function key (Select) to display a
selection window.
(Fig. 7-3)
> Now use the
arrow keys up/down
to mark the
category
All
in order to display all available
programmes in the Total list, or select
All new
to
display only new programmes found during the last
scan, or select
All found
to display all programmes
found during the last scan.
> Confirm by pressing
OK
.
Depending on your selection, a list will be displayed
showing either all programmes or all new program-
mes. Programmes that have already been entered in
the Favourites list are indicated by a check-mark.
In order to add programmes to the Favourites list, or to delete
them from this list, proceed as follows:
> Press
the
blue
function key (Change).
> Use the
arrow keys up/down
to highlight a
programme you wish to add to the list.
> Simply press the
green
function key (Add) to add the
selected programme to the Favourites list.
In order to select several programmes at the same
time proceed as follows:
> Press the
OK
key to go to Selection mode.
The highlighted programme will now ne indicated by a
cross in the left margin, and the menu display will be
shown in transparent form, with the picture in the
background.
> You can now use the
arrow keys up/down
to
select additional programmes, and mark them.
> Once you have selected and marked all the
programmes you wish to add, press the
green
function key (Add) in order to add the marked
programmes to the Favourites list.
7.1.3 Deleting programmes
7.1.3.1 Deleting from the Favourites list
If you use the above method to mark programmes with a
cross that are already in the Favourites list (marked by a
check-mark in the right margin), then pressing the
green
function key (Delete) will remove these programmes from the
user table. However, they remain stored in the Total list, and
can be added to the Favourites list again at any time.
7.1.3.2 Deleting from the Total list
Pressing the
red key
(Delete) followed by an affirmative
response to a confirming question will cause highlighted
programmes to be deleted from the Total list.
>
Highlight the programmes you wish to delete as
described above.
26
(Fig. 7-3)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 26
All manuals and user guides at all-guides.com
all-guides.com