>
To open the window listing the available actions, press the
blue
function key
Actions
.
>
Now use the
arrow keys up/down
to mark the line
Autofocus
.
>
Confirm by pressing
OK
.
Autofocus is started. Whilst the automatic alignment is being done the message
Auto
Focus
appears
10.3.3 Saving a satellite position
When you have completed the autofocus procedure, you must still save the satellite position
in the memory.
>
To do this, use the
arrow keys
to mark the field
save
.
>
Press the
OK
key. The message will appear if the orbital positions on which the
reflector is aligned coincide with the orbital position of the satellite to be stored.
>
Using the
arrow keys
mark the panel
Yes
if you wish to accept the pre-configured
programme of the selected satellites into the TV and radio lists and then confirm with
OK
.
>
If it has not yet been possible to ascertain the orbital position then a search inquiry
will appear.
>
To save the satellite position, use the
arrow keys left/right
to mark the field
Yes
and confirm by pressing
OK
.
>
Using the
arrow keys
mark the
Yes
panel in the subsequently appearing window if
you wish to accept the pre-configured programmes of the selected satellites into the
TV and radio lists and then confirm with
OK
.
If during this checking of the test transponder no pre-programmed position is
recognised, or if the signal is too weak, appropriate messages will be displayed on
screen.
>
To save the satellite position, use the
arrow keys left/right
to mark the field
Yes
and confirm by pressing
OK
.
>
Confirm the following message by pressing the
OK
key.
10.4 Current satellite list
The saved satellite positions can be found in the satellite list. Positions that have not yet
been saved are indicated in this list marked with an “
*
”.
>
To rotate the dish to a position included in the satellite list, use the
arrow keys
to
mark the field
Current satellite list
.
>
Press the
OK
key.
>
Use the
arrow keys up/dow
n to select the desired position.
>
Confirm by pressing
OK
.
The dish will now be rotated to the position selected. The ongoing rotation will be
indicated in the menu by the blinking message “
turn
”.
10.4.1 Turning to a satellite position
To turn the antenna to the position set in the satellite list, your digital receiver is equipped
with the function turn to sat.
84
10