![background image](http://html1.mh-extra.com/html/technisat/digicorder-hd-s2x/digicorder-hd-s2x_operating-manual_1069671026.webp)
If the function is switched on you can configure four lists of favourites (main list,
favourites 1, favourites 2 and favourites 3). The ex-works programming can be found
in the main list.
When the function is switched
off
only the main list is active.
6.6.2 Display time Information Banner
>
Use the
numeric keys
to set the desired display time for the Infobox. This can be
varied from
1
second to
15
seconds.
6.6.3 CI dual decoding
The CI dual decoding feature allows you to receive two different encrypted programmes
simultaneously, using only one CI module and only a single valid Smartcard.
>
Use the
left/right arrow keys
to select the CI slot holding the CI module for dual
decoding. Select
CI1
,
CI2
or
CI1+CI2
. If you prefer automatic recognition, select
auto. The setting off indicates the CI dual decoding feature is switched off.
Please also note Point 7.3.3.
6.6.4 Radio background picture
With this function the picture in the radio mode can be switched off. This is kinder to the
screen and you will save on current. Here:
on
means the picture is switched on also in radio mode.
off
means the picture will be turned off, in radio mode, after about 30 seconds and stays
off when a programme is changed.
auto
means that the picture will be turned off after about 30 seconds in the radio mode and
will briefly automatically appear during a programme change.
>
Use the
right/left arrow keys
to set
on
,
off
or
auto
.
6.6.5 Memory format radio recordings
Here you can select whether radio recordings on the hard drive should additionally be saved
in the MP2-format. These can be copied onto an external appliance.
>
Use the
right/left arrow keys
to set
PVR + MP2
in order to additionally save the
radio recordings in the MP2-format.
6.6.6 Font size
You can change the font size for the EPG long texts:
>
Set
large
or
small
by using the
right/left arrow keys
.
6.6.7 Network settings
In this submenu you have the option of adapting the digital receiver to your Ethernet network
environment.
Accepting settings
To store the settings made in this menu to memory, please proceed as follows:
>
Press the
green
function key
Accept
to store the changes made, and to return to
the menu
Settings
.
alternatively:
26
6