message
Loading EPG
and an indication of the EPGplus data already downloaded
in the display panel.
>
The downloading procedure can be interrupted by switching the digital receiver on
(
On/Standby
key).
9.2.6 Selecting radio channels/programmes
Use the same procedure as described in Point 9.2.5 to include radio channels/stations in the
programme guide.
Start update
>
To download the EPGplus data, use the
up/down arrow
keys to mark the
Start
download
field and confirm with
OK
.
9.3 Parental control
Your receiver is equipped with a parental control function. This means that important functions
(e.g. calling up the main menu) can be protected from unauthorised use. In addition, recordings
and channels that you have blocked can only be accessed by entering a four-digit PIN code
(unit PIN). To adjust settings in the menu
Parental control
proceed as follows:
>
Use the
Menu
key to call up the
Main menu
.
>
Use the
arrow keys up/down
to mark the line
Settings
.
>
Confirm by pressing
OK
.
The sub-menu
Settings
will be displayed
>
Use the
arrow keys up/down
to mark the line
Parental control
.
>
Confirm by pressing
OK
.
The menu Parental control will be displayed.
>
Use the
arrow keys up/down
to move the marker within the menu and to change
the individual positions as indicated. When selecting a menu item, please also note
any messages displayed on screen.
9.3.1 PIN query mode
>
In this line, use the
arrow keys left/right
to set the pin query mode of the
parental control function to
Once
or
Never
.
If you set the pin query mode to
Once
, and have not yet changed the PIN, you will be
requested to change the PIN. To do this, proceed as described in Point 9.3.2.
Never
If you select the setting
Never
you will never be asked for the PIN. The parental control
function is switched off.
Once
If you select the setting
Once
you will be asked to enter the PIN when calling up the main menu
or when selecting a blocked channel resp. a blocked hard drive recording. To make matters more
convenient for you, you will be asked for the PIN only once in each operating cycle.
9.3.2 Changing the PIN
The unit PIN code is set to
0000
at the factory.
>
Press the
OK
key.
The menu for changing the unit PIN code will be displayed.
70
9
