>
Press the
OK
key.
The active programme list will be displayed.
>
Now, with the assistance of the
option
key you can open a window with the types of
programme lists (
TV lists
,
TV provider
lists and overall
TV list
s).
The active programme list type is marked.
>
Use the
arrow keys up/down
to select, e.g. the programme list type
Total list
and confirm by pressing
OK
.
The alphabetically sorted Total list, containing all programmes, will be displayed.
>
Use the
arrow keys up/down
to mark the programme you wish to view.
>
You can get additional information on the current programme by pressing the
INFO
key .
>
Confirm by pressing
OK
.
or
>
Press the
green
function key
PVR
to go direct to the hard drive navigator.
7.2.4 Calling up blocked programmes
If a programme is selected that is blocked by the parental control function, the message
Unit PIN
will be displayed on screen.
>
Use the numeric keys to enter your
PIN code
.
The desired programme can now be viewed.
or
>
Switch to a programme that is not blocked.
If you have selected the setting
Once
under Point 9.3.1, the system will call for the PIN
code once when a blocked programme is selected. Thus, in order to make operation more
comfortable for you, you need to enter the PIN code only once during each viewing session.
7.2.5 Infobox
Each time you change programmes, an information box will be displayed briefly, showing the
programme slot and the programme name of the programme selected. In addition, other
programme properties will be indicated, such as
for Videotext,
for a 16:9 format
broadcast,
for encrypted programmes,
for Dolby Digital broadcasts,
for
subtitles,
for Mono broadcasts. In addition a yellow bar will be displayed indicating the
amount of time of that programme that has already elapsed. Also, EPGplus genres and any
age restrictions will be displayed, if transmitted.
7.3 Receiving encrypted programmes
Your appliance is equipped with an integrated CONAX de-coding system as well as with
a “Common Interface” for the recording of two CI modules. These can be used to receive
encrypted Programmes. To do this you must first of all either insert a CONAX Smartcard into
one of the two integrated card readers or plug in a CI module with a valid Smartcard into one
of the two slots envisaged:
>
Insert the CONAX Smartcard into a card slot of the integrated card-reader (golden
chip facing down and in the direction of insertion)
or
29
7
