>
Use the
arrow keys up/down
to mark the line
Search mode
.
>
By pressing the
OK
key, decide whether you wish to scan only for free-to-air
programmes (
Free programmes
), or whether you wish to include encrypted
programmes in the search (
All programmes
).
>
Use the
arrow keys up/down
to mark the field
Start search
. Please also note
Points 9.4.5 and 9.4.6 and the on-screen messages.
9.4.3 Transponder scan
You can scan a specific transponder (see Point 11 Technical terms) for Programmes. To do
this, you need to enter the transponder data.
Satellite
In this line you must enter the satellite on which the desired transponder is located.
>
Use the
arrow keys up/down
to mark the line
Satellite
.
>
Press the
OK
to display a table showing the active satellites, selected in accordance
with Points 6.4 and 10.4.
>
Now use the
arrow keys up/down
to mark the desired satellite.
>
Confirm by pressing
OK
.
The selected satellite will now be shown in the line Satellite.
Transponder frequency
>
Use the
arrow keys up/down
to mark the line
Transponder frequency
.
>
Use the
numeric keys
to enter the desired frequency in this line
Symbol rate
The symbol rate indicates the volume of data transmitted per second. This figure could be
shown as, for example, 27500 (27500 symbols per second).
>
Use the
arrow keys up/down
to mark the line
Symbol rate
.
>
Use the
numeric keys
to enter the symbol rate.
Polarisation
>
Use the
arrow keys up/down
to mark the line
Polarisation
.
>
In this line, use the
OK
key to enter the polarisation plane (
h
orizontal or
v
ertical), on
which the desired transponder is broadcast. The signal strength and the signal quality
of the transponder selected will be shown graphically at the bottom of the screen.
Search mode
>
Use the
arrow keys up/down
to mark the line
Search mode
.
>
By pressing the
OK
key, decide whether you wish to scan only for free-to-air
programmes (
Free programmes
), or whether you wish to include encrypted
programmes in the search (
All programmes
).
>
Using the
up/down arrow keys
subsequently mark the
Search
panel and
confirm with
OK
.
The scan will be started. Please also note Points 9.4.5 and 9.4.6 and the on-screen
messages.
73
9
