Basic safety instructions
Proline Promass 300 EtherNet/IP
6
2
Basic safety instructions
2.1
Requirements for personnel
Personnel involved in installation, commissioning, diagnostics and maintenance must
meet the following requirements:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the
application)
‣
Follow instructions and comply with basic conditions
Operating personnel must meet the following requirements:
‣
Be instructed and authorized by the plant operator with regard to the requirements of
the task
‣
Follow the instructions in this manual
2.2
Designated use
The designated use of the measuring device is described in the Operating Instructions
pertaining to the device → 4.
2.3
Occupational safety
For work on and with the device:
‣
Wear the required personal protective equipment according to federal/national
regulations.
If working on and with the device with wet hands:
‣
It is recommended to wear gloves on account of the higher risk of electric shock.
2.4
Operational safety
Risk of injury!
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
Modifications to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
‣
If, despite this, modifications are required, consult with Hauser.
2.5
Product safety
This device is designed in accordance with good engineering practice to meet state-of-the-
art safety requirements, has been tested, and left the factory in a condition in which it is
safe to operate.
Summary of Contents for Proline Promass 300 EtherNet/IP
Page 35: ......
