ETH COMMANDS
438
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth ifconfig
Modify an ETH interface.
SYNTAX:
eth ifconfig
intf = <{ethoa_8_35|eth_ge|eth_dmz1|
eth_guest1|eth_wan1}>
[dest = <{bridge|ethoa_8_35|eth_ge|eth_dmz1|
eth_guest1|eth_wan1}>]
[retry = <number{0-65535}>]
[wan = <{disabled|enabled}>]
[priotag = <{disabled|enabled}>]
[mtu = <number{1500-1508}>]
[vlan = <{default|wan|dmz|guest}>]
where:
intf
The name of the ETH interface to configure.
REQUIRED
dest
The destination interface for this ETH interface.
OPTIONAL
retry
The number of times the ETH connection setup should
retry before giving up.
OPTIONAL
wan
Enable/Disable WAN for this ETH interface.
OPTIONAL
priotag
Enable/Disable VLAN priority tagging.
OPTIONAL
mtu
The MTU for this ETH interface.
OPTIONAL
vlan
The VLAN for this ETH interface.
OPTIONAL
nickdj.co.uk