ETH COMMANDS
400
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth device ifautoneg
Adapt/list an Ethernet port's autonegotiation parameters (if autonegotiation
SYNTAX:
eth device ifautoneg
intf = <{ethif1|ethif2|ethif3|ethif4|ethif5|}>
[speed = <{auto|10Mb|100Mb|1Gb}>]
[duplex = <{auto|half|full}>]
[pause = <{none|asym|sym|both}>]
where:
intf
The Ethernet port's name to adapt or show info from.
REQUIRED
speed
The speed mode.
OPTIONAL
duplex
The duplex mode.
OPTIONAL
pause
The flow-control mode.
OPTIONAL
nickdj.co.uk