CWMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
137
cwmp server config
Configure the cwmpd towards the ACS.
SYNTAX:
cwmp server config
[url = <string>]
[username = <string>]
[password = <password>]
Execute a 'Trace & Debug' command. For
qualified personnel only. = <password>
where:
url
Set the HTTP URL used to contact the ACS server.
OPTIONAL
username
Set the username for ACS Digest Authentication.
OPTIONAL
password
Set the password for ACS Digest
Authentication.Command: debug exec
OPTIONAL
Execute a 'Trace & Debug' command.
For qualified personnel only.
Syntax : exec cmd = <quoted string>
REQUIRED
SYNTAX:
cwmp server config
cmd = <quoted string>
Create a DHCP client. = <quoted string>
where:
cmd
Quoted 'Trace & Debug' command stringCommand: dhcp
client ifadd
REQUIRED
Create a DHCP client.
Syntax : ifadd intf = <{ipsec0|Internet|lan1|dmz1|guest1}>
REQUIRED
SYNTAX:
cwmp server config
intf = <{ipsec0|Internet|lan1|dmz1|guest1}>
where:
intf
The name of the interface on which a DHCP Client is
defined.
REQUIRED
nickdj.co.uk