Technica Engineering 100base-t1_SPY, User Manual, Page: 8 / 43

Page 7 of 43
Pin Function Pin Function
1 GND Reference for Trigger 2 Host Trigger Line
3 LIN Bus 4 FlexRay Channel A BP
5 Wake Line 6 FlexRay Channel A BM
7 CAN D / 5 Minus (Low) 8 CAN E / 1 Plus (High)
9 CAN D / 5 Plus (High) 10 CAN E / 1 Minus (Low)
11 n.c. 12 CAN C / 2 Plus (High)
13 CAN B / 4 Minus (Low) 14 CAN C / 2 Minus (Low)
15 CAN B / 4 Plus (High) 16 n.c.
17 CAN A / 3 Minus (Low) 18 B12 Volt Input
19 CAN A / 3 Plus (High) 20 Battery Ground Input
3.2 BroadR-Reach connectors
The pins marked with (P) or (M) are used for the BroadR-Reach ports.
The user has to connect the (P) pin to the (P) pin of the periphery device.
The user has to connect the (M) pin to the (M) pin of the periphery device.
Note: If these two pins are swapped, the link LED may be lit on the BroadR-Reach slave side, but no
data transmission will be possible.
Middle Connector
Pin Function Pin Function
1 GND Reference for Trigger 2 FPGA Trigger Line OUT1
3 n.c. 4 n.c.
5 BroadR-Reach Port 3A / 5, P (Positive) 6 BroadR-Reach Port 3B / 6, P (Positive)
7 BroadR-Reach Port 3A / 5, M (Negative) 8 BroadR-Reach Port 3B / 6, M (Negative)
9 n.c. 10 n.c.
11 BroadR-Reach Port 2A / 4, P (Positive) 12 BroadR-Reach Port 2B / 3, P (Positive)
13 BroadR-Reach Port 2A / 4, M (Negative) 14 BroadR-Reach Port 2B / 3, M (Negative)
15 n.c. 16 n.c.
17 BroadR-Reach Port 1A / 1, P (Positive) 18 BroadR-Reach Port 1B / 2, P (Positive)
19 BroadR-Reach Port 1A / 1, M (Negative) 20 BroadR-Reach Port 1B / 2, M (Negative)
Outer Connector
Pin Function Pin Function
1 GND Reference for Trigger 2 FPGA Trigger Line IN1
3 n.c. 4 n.c.
5 BroadR-Reach Port 6A / 9, P (Positive) 6 BroadR-Reach Port 6B / 12, P (Positive)
7 BroadR-Reach Port 6A / 9, M (Negative) 8 BroadR-Reach Port 6B / 12, M (Negative)
9 n.c. 10 n.c.
11 BroadR-Reach Port 5A / 8, P (Positive) 12 BroadR-Reach Port 5B / 11, P (Positive)
13 BroadR-Reach Port 5A / 8, M (Negative) 14 BroadR-Reach Port 5B / 11, M (Negative)
15 n.c. 16 n.c.
17 BroadR-Reach Port 4A / 7, P (Positive) 18 BroadR-Reach Port 4B / 10, P (Positive)
19 BroadR-Reach Port 4A / 7, M (Negative) 20 BroadR-Reach Port 4B / 10, M (Negative)