Page
16
of
43
5.4.4
BroadR-Reach Port
The BR-1A to BR-6B labels on right side allow the user to configure BroadR-Reach Port settings:
BroadR-Reach mode
:
Here the user can select Master/Slave Mode of the selected Port. On each
BroadR-Reach link there has to be one
master
and one
slave
device.
Please set the “BroadR-Reach mode” to the opposite of what the device which is connected to this
port.
Output level:
The “Output Level” is the amplitude level of the BroadR-Reach signal. The user can set
Full level (Fullout = default) or half amplitude.
Note:
Both devices of one BroadR-Reach link have to use the same level. Otherwise the user will get
an instable link.
FullOut
Level is always recommended.