15
CH 6 : Focus
The Focus is used to vary the focal point of the projection.
CH 6 – Focus
DMX Value
Function
0-255
Focus – Far to Near
CH 7 : Prism / Prism Rotation
The Prism effect uses a 3 facet prism to split the beam. The effect can be rotated in
either direction at variable speeds or set to fixed positions. The fixed position is not
absolute and will change during use.
CH 7 – Prism / Prism Rotation
DMX Value
Function
0-4 Open
5-139
Fixed Positions – 0 to 450° – Non-absolute
140-197
Rotation – Fast to Slow – CCW
198-255
Rotation – Slow to Fast – CW
CH 8-11 : Pan / Tilt Position
Pan range is 540°. Tilt range is 270°. A position feedback system is used to enable
auto correction of Pan and Tilt. Speed and Movement options are controlled by the
Pan/Tilt Speed, Auto, Sound Channel 12.
CH 8 – Pan Coarse Position (540°)
CH 9 – Pan Fine Position (3.6°)
CH 10 – Tilt Coarse Position (270°)
CH 11 – Tilt Fine Position (3.6°)
DMX Value
Function
0 – 255
Position - Minimum to Maximum
CH 12 : Pan / Tilt Speed, Auto, Sound
When set to zero (0), movement speed is determined by the controller. Other values
under Tracking Speed allow user selectable movement speeds. Theatrical Mode
engages the shutter during movement or effect change. The internal programs can be
remotely activated. They can be run in Auto Trigger mode or in Sound Trigger mode
using the internal microphone.
CH 12 – Pan / Tilt
Speed, Auto, Sound
DMX Value
Function
0-120
Tracking Speed Fast to Slow
121-140
Theatrical Mode (shutter on change)
141-240
Internal Programs – Auto Trigger
241-255
Internal Programs – Sound Trigger
