www.techfass.com
RFID
reader module
MREM 82 NOGBKP, NIGBKP
8
First snap the actual reader module into the rear plastic at the top, and then snap it at the bottom.
Secure the snapped module with the small screw on the bottom.
If you are pulling the cabling on the surface, it is possible to use a surface installation box, which will allow you to pull the
cable of the reading module over the wall surface. First mount the installation box to the wall, choose the appropriate
cable pulling direction and break out the appropriate hole for the cable. Route the cable and mount the reader module.
CATALOGUE NUMBER
PART DESIGNATOR
COLOR
MAT5003D013
Adapter for WRE 120, surface cabling
BLACK
