6
TS580D-MM
Micro-Meter Mix Controller USER GUIDE
To initiate a dispense cycle with voltage
4
Features
Figure 1: Controller Features
•
Air Output A/B
–
Pressurized air to connect to the material syringes. The ports
share a common source.
•
Motor Ports C/D
–
Connected to the motors/pumps, provide drive power to the
motors, and read encoder feedback.
•
Air Regulator
–
Reduce inlet air pressure (100 psi typical) to a desired pressure.
•
Air Inlet
–
Connect to pressurized air source (100 psi typical).
•
Air Outlet Unregulated
–
share pressurized air to auxiliary equipment.
No Connection
No Connection
To
initiate a dispense cycle with
contact closure Pin 5
–
Pin 6
Pin 1 (+)
Pin 2 (-)
Pin 3
Pin 4
Pin 5
Pin 6
Chassis Ground
Pin 5
Pin 3, 4, 7, 8, and 9 = No Connection
5-24
VDC
