20
TS580D-MM
Micro-Meter Mix Controller USER GUIDE
Figure 22: Settings (Weight Mode)
5.9.4 Pause Time
This function is not available at this time. When available, this function will allow the
operator to set delay time between dispense and suckback.
5.9.5 Pump 2 Flow Rate Adjustment (P2 Adjust)
In some cases, after calibration is done, the mix ratio between the 2 pumps is still
slightly off. This function allows the operator to manually change the flow rate of
Pump 2 to align the mix ratio between the 2 pumps.
1.
Enter the Mix Ratio
2.
Touch the Up arrow to increase the flowrate of Pump 2
3.
Touch the down arrow to decrease the flowrate of Pump 2
4.
Touch the green check mark to save the data
Figure 23: Setting Pause Time (not yet available)
