27
TS580D-MM
Micro-Meter Mix Controller User Guide
6.
Network Settings
On clicking the cloud with UP arrow, you will arrive at the Network/RCP/IOT settings
screen. Each row has grey or green buttons. The Green is selected. For the first row,
selecting ‘Settings’ will allow the selection choices located below. Selecting ‘Remote’
will allow you to adjust the Remote Server Address and Port. Selecting ‘Static’ will
allow you to adjust the static IP address if DHCP is not desired.
Network Settings Selected
Click on RCP to enable RCP control. IOT mode is not implemented. Click on Dynamic
to obtain an address through DHCP, or Static to enter an address manually.
RCP Settings
Click on ‘Remote’ to set the IP address and port for the RCP server.
Figure 32: Network Settings Screen
Figure 33: Setting the IP address and port
