TEC TEC FS-3600 Owner'S Manual Download Page 139

Page: 139 / 146

Chapter 5 - Reports

Deposit Entry

FS-3600 Owner’s Manual

5-29

5.14 Deposit Entry

System

Revenue

Center Station User

The Deposit Entry function can be used to record actual amounts in
the cash drawer for comparison with reported totals.

Notes:

The amounts entered in this function are on the Financial report
if the option REQ CASH DECL in the System Setup/System
Config table is set.

If Deposit Entry is set for X/Z Reports in the Function Setup
table, the screen will display when these reports are initialized,
forcing the user to make entries.

Procedure:

1. Index the amount for each media then press

{TOTAL}

2. Press

{EXIT}

when all entries are complete. To correct an

entry, index the number of the media and press

{TOTAL}

3. When all entries are correct press

{EXIT}

again.

4. If BLIND DEPOSIT is YES, screen prompts:

Are you sure?

5. If BLIND DEPOSIT is NO, screen prompts:

Diff $xx.xx, Save?

6. If all entries are correct and should be saved, index

{1}

for YES.

To discard entries, index

{0}

for NO, then

{1}

for CANCEL.

Summary of Contents for TEC FS-3600



















































































































































Search results

Summary of Contents for TEC FS-3600

Reviews:

Related manuals for TEC FS-3600

Brands by name

Popular brands

TEC TEC FS-3600, Owner'S Manual

Search results

Summary of Contents for TEC FS-3600

Reviews:

Related manuals for TEC FS-3600

Brands by name

Popular brands