TEC MA-600 Series, Owner'S Manual

Page: 137 / 164

4. PROGRAMMING OPERATIONS
EO1-11154
4.15 Department Table Programming
4-39
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode
Depress [ ↓ ] twice then [Enter] .
or
Depress [3] .
“ 3 DP/PLU ” for Department/PLU table programming is selected.
Depress [1] or [Enter] key.
“ 1 DP ” is selected.
Depress [1] or [Enter] key.
“ 1 DP SETTING ” is selected.
Select a department to be programmed
with the [ ↑ ] or [ ↓ ] key, then depress
[Enter] .
A department to be programmed is selected.
[Enter]
The ECR enters detailed setting mode for department.
Input a Group No. (01 to15), then
depress [Enter] .
Department Group No. Setting (See *1.)
Input a preset price, then depress
[Enter] .
Preset Price Setting (See *2.)
Select a department status with the [
↑
]
or [ ↓ ] key, then depress the [ → ] key to
set/reset the status. After that, depress
[Enter] .
Department Status Setting (See *3.)
Input a VAT/Add-on tax status code
(max. 8 digits), then depress [Enter] .
VAT/Add-on Tax Status Setting (See *4.)
Input a High Amount Limit (max. 7
digits), then depress [Enter] .
High Amount Limit Setting (See *5.)
Input a Low Amount Limit (max. 7
digits), then depress [Enter] .
Low Amount Limit Setting (See *6.)
Input a Gross Profit Rate (0.01 to
100.00%), then depress [Enter] .
Gross Profit Rate Setting (See *7.)
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.