11
Alarm user settings programming (Menu 2)
Programming is carried out in accordance with table Alarm user settings configuring (Menu 2)
Table 10�
Alarm user settings configuration (Menu 2)
No.
Description
Current option setting*
Factory
default
settings
On
Off
Range
LED
Qty.
of audible
signals
LED
Qty. of audible
signals
1
Immobilizer feature
On
On
1
Off
2
-
2
Anti HiJack feature
On
On
1
Off
2
-
3
Anti HiJack feature response delay
1
-
-
-
-
From 1 to 10*
4
Siren working modes
4
-
-
-
-
From 1 to 4*
5
PIN code entering audio confirmation
On
On
1
Off
2
-
6
Maintenance mode audio indication
On
On
1
Off
2
-
7
Central locking system activation when driving
Off
On
1
Off
2
-
8 Central locking system deactivation when igni-
tion is turned off
Off
On
1
Off
2
-
9
Comfort feature control
On
On
1
Off
2
-
10
Arming / disarming audible confirmation volume
4
-
-
-
-
From 1 to 4*
* – number of audio signals is indicated�
Annotations to Table
p� 1
“Immobilizer feature” allows turning the Immobilizer feature
on or off�
p� 2
“Anti HiJack feature” allows turning the Anti HiJack feature on or
off�
p� 3
“Anti HiJack feature response delay” allows setting the distance
before locking (Speed control is on) or time before locking (Speed con-
trol is off)� The time is set by 20 second intervals; the distance is set by
100 meter sections� For example, if the option’s setting is 3, then:
◊
Locking activation delay is 60 seconds;
◊
Distance before locking is 300 meters�
p� 4
“Siren working modes”� Allows setting the siren working mode:
1 —
Siren is disabled;
2 —
Siren is not triggered in warning mode;
3 —
Volume level of warning signals corresponds to the volume
level when arming/disarming (see� p�10);
4 —
Siren is enabled (maximum volume level)�
p� 5
“PIN code e
ntering audio confirmation” allows turning PIN code
entering audio confirmation on or off.
p� 6
“Maintenance mode audio indication” allows turning Mainte-
nance mode audio indication on or off�
p� 7
“Central locking system activation when driving” allows turning
the automatic central locking when driving feature on or off�
p� 8
“Central locking system deactivation when ignition is turned off”
allows turning the automatic central lock unlocking upon ignition fea-
ture deactivation on or off�
p� 9
“Comfort feature control” allows turning automatic windows
closing during vehicle locking on or off�
p� 10
“Arming / disarming audible
confirmation
” allows setting an
arming / disarming audible confirmation volume level:
1 —
silent arming/disarming
2 —
minimum volume level
3 —
medium volume level
4 —
maximum volume level�
Programming sequence
1
Turn the ignition on
2
Enter the PIN code and wait for confirmation (see PIN code
entering section)
3
Enter Menu 2 by pressing and releasing the Programming but-
ton 12 times (start doing this no later than 10 seconds upon
PIN code entering)� If all operations have been carried out cor-
rectly, the Alarm will inform on this fact by 4 audible signals
(see Programming menu table)�
4
Beginning from point 4, programming algorithm is analogical
with the one described in Alarm hardware features configura
-
tion (Menu 1), except for points 6�1, 6�2, 6�3�
PIN code changing
1
Turn the ignition on
2
Enter the PIN code
3
Press the Programming button 14 times� Wait for Alarm’s con-
firmation by 1 audible and 1 light signals.
4
Set the new PIN code by using any combination of buttons
perceived by the Alarm (see Integrator files). When entering
a new PIN code, each pressing perceived by the Alarm is con-
firmed by the audible and light signals for further controlling
assistance�
5
Wait for confirmation by 1 audible and 1 light signal.
6
Re-enter the new PIN code�
7
Wait for confirmation:
◊
2 audible and light signals and a sound trill mean that the PIN
code has been changed and the Alarm has left the PIN code
changing mode�
◊
Sound alert means that the PIN code has not been changed
and the Alarm has left the PIN code changing mode� A mistake
has been made when entering the new PIN code confirmation
and it is necessary to repeat the PIN code changing procedure
starting from p� 1�
You can exit the PIN code changing mode anytime by turning the ig-
nition off�
Programming button changing
1
Reset all settings to factory default�
2
Interface the Alarm with the vehicle�
3
If analog steering wheel buttons are used please define them
(see above for the description of this procedure)�
4
In order to assign any of the buttons perceived by the Alarm
as the Programming button, press the selected button and hold
it for longer than 5 seconds until a long audible signal will
be heard�
Programming button can be assigned within 15 minutes after
Integrator files interfacing with the vehicle.
