TS-1 Touchscreen Manual
9
Configuration with a single monitor only (USB version)
When using Teatro with the touchscreen only, the following connections have to be made.
The PC‘s keyboard
(purple) must be
connected as usual
The PC‘s USB port
must be connected
to the touchscreens
socket 3. (A USB cable
is supplied with the
touchscreen hardware)
PC mouse
(green) must be
connected as
usual.
The PC‘s VGA
connector must be
connected with the
touchscreens socket 2.
(A VGA cable is supplied
with the touchscreen
hardware)
Configuration with two monitors (USB version)
When using Teatro with the usual PC monitor plus the touchscreens TFT display, the following connections have to be made.
1
2
PC mouse
(green) must be
connected as
usual.
Connector 1 of the double-
head graphics card must be
connected to the usual PC
monitor.
Connector 2 of the double-head
graphics card must be connected to
the touchscreens socket 2.
CAUTION!
On some graphic cards output 1 is located at the
bottom and output 2 is located at the top of the
graphic cards backplane! Always make sure the
normal PC monitor is connected to output 1 and
the touchscreen is connected to output 2!
The PC‘s keyboard
(purple) must be
connected as usual
The PC‘s USB port
must be connected
to the touchscreens
socket 3. (A USB cable
is supplied with the
touchscreen hardware)
