Team Nisca Nisca PR5300, Operation Manual

Page: 52 / 57

- -
50
- b Releasing card jam
10
)
Most of the card jamerrorsarecausedbydirtand stain of the card transport rollers.
If the rollersaredirty,cardjamerrorfrequentlyoccur.To prevent this, periodic rollercleaning as
described in paragraph 6 is recommended.
Dependingontheposition of thecardjam, you may have toputyourhandintheprinter. Please be
careful when doing so and be sure to turn OFF the powerbefore beginning the work.
Usually, jammed card can be ejected automatically to the Card Eject Exit bypressingClear key on the
operation panel. If thecardcan not be ejected in thismethod, remove the jammed card manually. The
location BlockofcardjamisshownontheLCDpanel.
( )
The figures next to the "Card Jam Area" indicates the card jam location moreclosely.
Area Location
Card JAM Feeder Inside the Feeder Block
01,02
Area -
Card JAM F.Turn Between Feeder BlockandFlipTurnBlock
02,04
Area - WithinFlipTurnBlockandeject
03
Between FlipTurn Blockand Encodr
08
Card JAM Print 0 Between Flip Turn BlockandPrintblock
4
Area - With in PrintBlock
05 `07
Card JAM Encode 08 Between Flip Turn Blockand Encoder
Area - 09 Within Encoder