Team Nisca Nisca PR5300, Operation Manual

Page: 41 / 57

- 39 -
- c ) CleaningofthePrintRollers
6
This Operation shall be done b y a s e r v i c e p e r s o n n e l .
Before starting this operation, please read the general advice which appears i
the beginning part of this section.
Turn OFF the power without fail before the cleaning operation.
¤It may cause a trouble and/or to have electrical shock.
The figure on Right is shown that
the side cover on ejecting side is
opened.
To open the side cover, take off a
screw located under the stacker.
Prepare cotton swab and put a
few alcohol, clean the whole
surface of all 4 pairs of
rubber rollers shown with
and white mold
rollers.
To clean them easily, use the
green handle located on front
access area as shown in figure
on right.
This handle is used for
ratating those rolles manualy.
- d) Cleaning ofthe Ribbontransport roller
6
Before beginning this operation, please read the general advice which appears
the beginning part of this section.
Press key first, then pull out the ribbon cartridge. Ribbon Change
Open the ribbon cartridge, take the ribbon out.
Clean the white mold roller on the lower tray and black rubber roller on
the top cover.
After cleaning, put the ribbon back to the cartridge after waiting till the
rollers are completely dry.
!