Team Nisca Nisca PR5300, Operation Manual

Page: 27 / 57

- 25 -
b) Operation ofNormal Mode
4 -
When the power is turned ON, the printer is in Normal Mode.
The (Green) turns ON and the printer status is shown on the panel.
Power LED LCD
Normal Mode is the mode for printing, and the printer status is shown on the
LCD "Ready to Print"
panel. For example, when the printer is waiting to print,
is shown.
"Card Empty" "Ribbon
If there is any problem to print, error message such as or
appears.
Empty"
Thus, the mode for printing is called as Normal Mode, and is differentiated fro
the User Mode.
Checking "Ready to Print" status
Ready LED "Ready
When printing, check that the (Green) is ON. At such status,
or is displayed on the panel.
to Print" "Ready to Print/Removable Ribbon" LCD
Recovering from the Error status
When the (Red) is lit, there is some error in the printer and it can
Error LED
not operate normally. In such case, the messages on the panel must be
LCD
followed.
Please refer to Paragraph 10, Countermeasure for Trouble.
After releasing the error, press Clear key to resume to .
"Ready to Print"
If appears on the , resolve the trouble and
"Cannot Recover/Please Reset" LCD
press Clear key for about 3 second. Release the key after checking that the
display has been changed to so that the printer is reset and returned to
"Reset"
the status of after the power ON.
Recovering from the Error status
To pull out the Ribbon Cassette containing the ribbon in the middle of operatio
for example, to change the ribbon type or to check the amount of the remaining
ribbon, press key. The message on the panel changes from
Menu/Ribbon Change LCD
to and the Ribbon Cassette
"Ready to Print" "Ready to Print/Removable Ribbon"
can be pulled out.
Clearing the Output Data
To erase the output data which is still in the memory of the printer, reset the
printer.
Clear LCD
Press and hold the key for about 3 sec. to change the message on the
panel to . Release the button after checking the above. The printer
"Reset"
becomes to the status of immediately after the power is turned ON.