138
118
95
121
142
33
31
107
133
95
31
143
137
48
31
B
B
B
B
BA
A
A
A
AG F (Contin
G F (Contin
G F (Contin
G F (Contin
G F (Continued)
ued)
ued)
ued)
ued)
1. Make sure that the Cross Bones (107) are in the Outdrives
(60)(66) before continuing.
2. Insert a 4-40x 1/2" Cap-Head Screw (31) through the Shock
Mount Ball (121) in one of the rear Shocks. Position the bottom of the
Shock, with the Screw, behind the the Shock mounting area on the left
rear Suspension Arm (118). Thread the Screw all the way into the
second hole, on the top row, from the inside on the rear Arm, as
shown.
3. Slide a short Shock Mount Bushing (142), large side first, over
the uppper shock mounting Screw (33) on the left side of the rear
Shock Tower.
*NOTE: Before attaching the top of the Shock, make sure that the
Dogbone is in place in the Outdrive.
4. Place the top of the Shock Body (138) over the Shock Mount
Bushing on the Rear Shock Tower (123) and secure it with a 4-40
Locknut (95).
5. Repeat Steps 1-4 for the right rear Shock.
1. Insert the Shock End (133) of a front Shock between the shock
mounting rails of the front suspension Arm (48) and line up the hole
in the Shock Mount Ball (121) with the middle hole in the Arm.
2. Attach the Shock End to the front Arm by threading a 4-40 x
1/2" Cap-Head Screw (31) all the way into the Arm.
3. Slide a long Shock Mount Bushing (143), large side first, over
the Screw (33) on the left side of the Front Shock Tower (34).
4. Place the top of the Shock Body (137) over the Shock Mount
Bushing on the front Shock Tower and secure it with a 4-40 Locknut
(95).
5. Repeat Steps 1-4 for the right front Shock.
Figure F-8
Figure F-7
Step F-7
Step F-7
Step F-7
Step F-7
Step F-7
Step F-8
Step F-8
Step F-8
Step F-8
Step F-8
95
142
31
143
Rear Shock Install:
Front Shock Install:
31
95
Summary of Contents for XXX-NT AD2
Page 65: ......
