2) Volume adjustment:
To adjust the volume level of the reproduction of incoming signals depress out of the keys
( 4 ) Down
▼
3 times or Up
▲
2 times. The display shows . Then depress briefly
the confirmation key ( 5 ). Then the display shows . The number of those points
or bars shows the actual setting of the volume adjustment. The volume level of the tones
depends from the actual setting of the volume adjustment. At the highest or lowest value
you hear a triple confirmation tone. By the help of the Up/Down keys ( 4 ) this setting can
be changed and watched in the display. Press the confirmation key ( 5 ) to select the
desired setting of the volume adjustment, and the display will return to the main screen
of the FM radio mode.
3) Adjustments for the return to the PMR operation:
The unit remains also in FM radio mode ready to receive signals on the actual PMR chan-
nel. On receiving of an incoming signal the unit can either switch to PMR operation or it
can request from you to choose between PMR operation and FM radio operation. To
select one of these two return modes depress out of the keys ( 4 ) Down
▼
2 times or Up
▲
3 times. The display shows the writing . Then depress briefly the confirmation
key ( 5 ). Then the display shows . On the left side of the writing “Auto“ you see
an arrow, which can be moved with the help of the Up/Down keys ( 4 ) either on the left
side of the writing “Manu“ or back on the left side of the writing “Auto“. The setting “Auto“
has the effect, that the unit switches itself automatically to PMR operation on reception of
a signal on the actual PMR channel. The setting “Manu“ has the effect, that the unit gives
a short tone to inform the user about the reception of a signal on the actual PMR
English
36
VOL
PMR
Auto
Manu
▼
