can be changed in the wanted direction in a ring like system. Press the confirmation key
( 5 ) to select the desired code number, and the display will return to the main screen of
the PMR mode. If the code number is different from zero, it will be visible in the PMR
main screen at the position ( F ). That means that the CTCSS function has been acti-
vated with the CTCSS tone corresponding to the code number.
If the selected code is “00“, there will be no code number visible in the lower right corner
of the PMR main screen. That means that the CTCSS function is switched off now. In the
table in the annex you find the corresponding CTCSS frequencies to the Code numbers.
3) Volume adjustment:
To adjust the volume level of the reproduction of incoming signals depress out of the
keys ( 4 ) Down
▼
7 times or Up
▲
3 times. The display shows the writing
. Then
depress briefly the confirmation key ( 5 ). Then the display shows a loudspeaker symbol
with one or several points or bars . The number of those points or bars shows
the actual setting of the volume adjustment. By the help of the Up/Down keys ( 4 ) this set-
ting can be changed and watched in the display. The volume level of the tones depends
from the actual setting of the volume adjustment. At the highest or lowest value you hear
a triple confirmation tone. Press the confirmation key ( 5 ) to select the desired setting of
the volume adjustment, and the display will return to the main screen of the PMR mode.
4) Squelch adjustment:
To adjust the threshold level of the noise suppression ( squelch ) in reception mode
depress out of the keys ( 4 ) Down
▼
6 times or Up
▲
4 times. The display shows the
writing . Then depress briefly the confirmation key ( 5 ). Then the display shows
English
29
VOL
SQ
