you see the microphone symbol now. This indicates that the VOX function is active
now. If you talk loud enough into the microphone Mic ( 7 ), a short tone comes from the
speaker and in the display you see at the position ( D ) the symbol . 1 to 2 seconds
after you have finished your message the unit switches back to receive mode, which is
indicated by two short tones and the disappearance of the symbol .
To deactivate the VOX function depress out of the keys ( 4 ) Down
▼
5 times or Up
▲
5 times. The display shows the writing . Then depress briefly the confirmation key
( 5 ). Then the display shows . On the left side of the writing “off“ you see an arrow,
which can be moved with the help of the Up/Down keys ( 4 ) either on the left side of the
microphone symbol or back on the left side of the writing “off“. For the deactivation of the
VOX function put the arrow on the left side of the writing “off“ and then depress the con-
firmation key ( 5 ). After this entry the display returns to the main screen of the PMR
mode. On the position of the microphone symbol ( A ) you see the transceiver symbol
again. This indicates that the VOX function is no longer active.
The adjustment of the threshold of the sound level at which the transmitter starts to work,
can be executed at inactive or active VOX function. To this end depress out of the keys
( 4 ) Down
▼
5 times or Up
▲
5 times. The display shows . Then depress briefly
the confirmation key ( 5 ). Now put the arrow on the left side of the microphone symbol
below and then depress the confirmation key ( 5 ). Then the display shows the
microphone symbol with one or several points or bars. The number of those points or
bars shows the actual setting of the VOX sound level threshold. The more points or bars
appear, the louder you have to speak to start the transmission. By the help of the
Up/Down keys ( 4 ) this setting can be changed and watched in the display.
English
31
T
T
VOX
VOX
