the writing with one or several points or bars. The number of those points or bars
shows the actual setting of the squelch sensitivity level. The more points or bars appear,
the lower the level can be for opening the squelch. By the help of the Up/Down keys ( 4 )
this setting can be changed and watched in the display. At the highest or lowest value
you hear a triple confirmation tone. Press the confirmation key ( 5 ) to select the desired
setting of the squelch sensitivity level, and the display will return to the main screen of
the PMR mode.
5) Activating and setting of the VOX function:
If the VOX function ( = voice activated transmission ) is active, the transmitter is switched
on if the sound level at the microphone Mic ( 7 ) exceeds a certain intensity. After a cer-
tain time, within which the sound level at the microphone remains below this intensity
value, the radio switches automatically back to receive mode. During reception of an
incoming signal or in radio operation the VOX function is inhibited. Thus you can com-
municate without the necessity of having a hand at the unit.
To activate the VOX function depress out of the keys ( 4 ) Down
▼
5 times or Up
▲
5
times. The display shows the writing . Then depress briefly the confirmation key
( 5 ). Then the display shows . Below it is a microphone symbol. On the left side of
the writing “on“ you see an arrow, which can be moved with the help of the Up/Down
keys ( 4 ) either on the left side of the microphone symbol or back on the left side of the
writing “on“. For the activation of the VOX function put the arrow on the left side of the
writing “on“ and then depress the confirmation key ( 5 ). After this entry the display returns
to the main screen of the PMR mode. On the position of the transceiver symbol ( A )
English
30
VOX
