number. This is the main screen for PMR monitor operation. In this condition you can only
adjust the volume level setting ( Para 3 ) or the squelch sensitivity setting ( Para 4 ). This
can be done by the help of the Up/Down keys ( 4 ). To adjust the volume level of the repro-
duction of incoming signals depress out of the keys ( 4 ) Down
▼
2 times or Up
▲
once.
See Para 3 for the further instructions. To adjust the squelch sensitivity setting for incom-
ing signals depress out of the keys ( 4 ) Down
▼
once or Up
▲
2 times. See Para 4 for
the further instructions. To reactivate the squelch, depress in the main screen for PMR
monitor operation the confirmation key ( 5 ), and the display will return to the main screen
of the PMR mode.
8) Activating of the channel scan function:
In channel scan mode the unit looks for occupied channels on which the squelch opens.
At the same time it examines whether the demodulated reception signal contains also a
CTCSS tone. If the unit has found one, it identifies its corresponding code number and
shows it in the display at the position ( F ). To activate the scan function depress out of
the keys ( 4 ) Down
▼
2 times or Up
▲
8 times. The display shows the writing .
Then depress briefly the confirmation key ( 5 ). Then the display shows . On the
left side of the writing “UP“ you see an arrow, which can be moved with the help of the
Up/Down keys ( 4 ) either on the left side of the writing “DOWN“ or back on the left side
of the writing “UP“. For the final activation of the channel scan function put the arrow on
one of both writings and then depress the confirmation key ( 5 ). The display returns to
the main screen of the PMR modebut without a CTCSS code number. According to the
chosen direction the channel scan starts stepping upwards or downwards. The unit stops
English
33
Scan
on?
UP
DOWN
▼
