Teac LCDV2656HDR, User Manual

Page: 34 / 56

Recording Operation
3) Scheduled Recordings
Scheduled Recording is a function which allows the user to record future programs without physically
being present to initiate the recording. A schedule setup is made to mark recording dates and times of
the broadcasted programs stated on the Electronic Program Guide (EPG). Recording would terminate
at the end of the program. When recording starts the control bar shown below will display.
The current state of the program
The current time
The name and number
of the program
The process of the program
A-B mark
Time Shift
Time shift is an ideal way to temporarily pause live TV in case of a distraction such as a doorbell or
a ringing telephone. Once the distraction has passed, playback can be resumed from the point
where the TV program was paused. Press the PLAY/PAUSE button on the remote control to start
the Time shift mode. Press the PAUSE button again to resume playback.
NOTE:
‡'LVSOD\WKH7LPHVKLIWLQIREDUE\SUHVVLQJ(;,7EXWWRQRQWKHUHPRWHFRQWUROSUHVV
again to close.
‡3UHVVWKH3/$<EXWWRQWRSOD\WKH7LPHVKLIWHGSURJUDP
‡3UHVVWKH6723EXWWRQWRH[LW7LPHVKLIWDQGUHWXUQWROLYH79EURDGFDVW
5(&25',1*,167$1'%<02'(
- This unit is able to record while in Standby mode.
- Start a recording, then press the power button.
- A pop up message as shown above will be displayed.
- Select "Turn off the screen, and continue recording .
- Or select "Stop recording, and power off .
- While recording in standby mode, unit will not output any picture or sound. The power indicator will
flash in green and red consecutively while recording is in progress during Standby mode.
6FKHGXOHGUHFRUGLQJLVH[SODLQHGLQGHWDLORQWKHIROORZLQJSDJH
Recording Operation
DVD
Operation
Maintenance and Service
30