Teac LCDV2656HDR, User Manual

Page: 15 / 56

Basic Operation
Basic Operation
OSD Menu
Multimedia Operation
Recording Operation
DVD
Operation
Maintenance and Service
11
The following section conveys the unit’s general operation, such as, switching the unit on,
selecting the input source, and using the automated channel search command.
Switching the unit on
The following steps are a guide to switch the unit on:
1. Connect the television unit to the antenna wall socket using a coax television cable plug.
2. Connect power cord to power supply and turn on the POWER Switch to ON.
3. Press the POWER button on the remote control or on the television panel.
4. The on screen television display should appear.
Selecting an input source
The unit incorporates multiple input sources which can be
selected via the
INPUT button on the television panel or
remote control. The following steps explain the procedures
involved.
1. Press the INPUT button to enter the Input menu. The
screen will display the Input Source menu.
2. Use the CH+/- button on the TV set or /\ / \/ direction
buttons to select the desired input source.
3. Press OK to enter the selected source.
NOTE: Please make sure the device is connected
before selecting the input source.
Input Source
Move
Select
Quit
OK EXIT