To set snooze:
To set snooze, press the
SNOOZE/DIMMER
button when the alarm
sounds.
The alarm will stop sounding and the alarm indicator will flash. After 10
minutes, the alarm will sound again.
To switch off the alarm:
To switch off the alarm, press the
ALARM RESET
button.
The unit will set to Standby.
ALARM REPEAT
The alarm(s) will sound at the same time each day when set.
ADVANCED OPERATION
The advanced features are enabled when an iPhone or iPod touch with
TEAC iDock application
running is docked to the unit (iPhone in this
section also applies to iPod touch).
Advanced features -
Weather and temperature display
Automatic clock setting via the iPhone application
Alarm setting via the iPhone application
Radio operation via the iPhone application
Installing the application:
The
TEAC iDock application
must be installed on the iPhone to enable
the advanced features.
Press the
INPUT
button repeatedly to
select iPod function mode.
Dock the iPhone.
Unlock the iPhone if necessary.
If the application has not been installed,
the message 'Application Not Installed'
will be displayed on the iPhone screen.
Touch 'Yes' and follow the prompts on
the iPhone screen to download the
application from iTunes and install it.
18
