4
Te Pari Racewell HD3, HD4 & HD6 Operators Manual
Racewell HD
SHEEP HANDLING SYSTEMS
Compressor
The following specification is required for your Racewell Handler:
If your compressor lower capacity than these specification then the Racewell may work slowly.
Manufacturer installation and maintenance guidlines for the compressor should be followed.
This includes checking the oil and draining water from the tank.
Please note: when turning the compressor on or off use the switch on the compressor
and not the switch at the power source.
Attaching the air fittings and connecting the compressor
Connect the air line to the Racewell handler. The connection
is located underneath the Clamp and Weigh Area. If the
compressor is located some distance away from the racewell
handler it is recommended that you include a water trap on the
line to avoid condensation getting to the handler pneumatics.
The image above shows a design for a simple water trap.
Power Supply
Power can be supplied via
mains (110V AC to 240V AC)
or via the 12 Volt battery leads
supplied with the handler. The
internal system is all 12 Volt AC
power supply.
1 m / 3 feet
(approx)
From your Compressor
Ball or tap valve
To your Racewell
12 CFM capacity
Minimum pressure of 90 psi
