Te Pari Racewell HD3 Operator'S Manual Download

Page: 15 / 16

Te Pari Racewell HD3, HD4 & HD6 Operators Manual

Racewell HD

SHEEP HANDLING SYSTEMS

EC DECLARATION OF CONFORMITY MACHINERY

(according to Annex II.1.A of the Machinery Directive)

Te Pari Products Ltd hereby declares as manufacturer that the Racewell Sheep
Handler with specifications:

Meets the provisions of the following Directives:

Machinery Directive (2006/42/EG)

And furthermore declares that (parts of) the following harmonized standards have
been applied:

Machine

Type

Serial

Year

Manufacturer

Te Pari Products Ltd

Address

9 Endeavour Crescent, Oamaru, Otago 9494

Country

New Zealand

Responsible

Patrick Blampied

ISO 14120

: Safety of machinery - Guards - General requirements for the design and

construction of fixed and movable guards

IEC 60204-1

: 2006 Safety of machinery - Electrical equipment of machines

Part 1: General requirements

ISO 13849-1

: Safety of machinery - Safety-related parts of control systems

Part 1: General principles for design

IEC 61310-1

: 2008 Safety of machinery. Indication, marking and actuation.

Part 1: Requirements for visual, auditory and tactile signals

IEC 61310-2

: 2008 Safety of machinery. Indication, marking and actuation.

Part 2: Requirements for marking

ISO 4414

: 2010 Pneumatic fluid power - General rules and safety requirements for

systems and their components

Summary of Contents for Racewell HD3

















Search results

Summary of Contents for Racewell HD3

Reviews:

Related manuals for Racewell HD3

Brands by name

Popular brands

Te Pari Racewell HD3, Operator'S Manual

Search results

Summary of Contents for Racewell HD3

Reviews:

Related manuals for Racewell HD3

Brands by name

Popular brands