RBK-X1
PN 2234800-1
Page 16 Rev A Sept 2019
3.1 Heat parameter
In this interface, operator can pre-set/edit heat parameter (product size/heat temperature/heat time) stored in
the 10X quick button.
To edit the parameter stored in button
(for example):
1. Switch
to
, allow the operator to edit the parameter.
2. Press on the quick button
, then you would find the original parameter stored in
will show on
and
3. Click on the value on
, to input the new value.
4. Press on the quick button for 5 second, to upload new parameter to quick button
. You would find the
“Current” parameter would change to “Set Value”
. New parameter was successfully modified.
5. Switch
to
, to exit editing.
6. Click on
, to back to main interface.
Note:
is showing parameter, which the processor is currently carry out.
