RBK-X1
PN 2234800-1
Page 33 Rev A Sept 2019
4.2.8
Emergency Heater Chamber Release
This is an EMERGENCY procedure used in the unlikely event of The Heater Chamber not opening when
the Emergency stop is activated. The equipment is connected to an AC mains electricity supply. Before
undertaking any maintenance or repair, always turn off the equipment and ensure it is isolated from the
AC supply. Allow machine to cool down before starting this procedure!
1. Push bottom heater cover to rear of machine until heater opens (See below picture).
2. Push down on GRIPPER RELEASE stubs and remove splice.
Manual movement of bottom heater
FRONT OF THE MACHINE CAN BE HOT TO THE TOUCH
