RBK-X1
PN 2234800-1
Page 19 Rev A Sept 2019
3.4 Production Setting
1.
Production quantity counter. The number here will +1 automatically after each cycle is
completed.
(The counter won’t count the cycle which was interrupted.)
2.
Operator can preset the production target (quantity) here.
a. If you input the value, when processor complete the setting production quantity, on the main interface
will pop up a tip
“complete”,
to remind the operator production is completed. (see below capture).
b. Currently the processor cannot operate unless you reset by click on icon
.
c. After reset counter, operator can new start production base on the quantity preset on
, unless you turn it OFF
by input value “0”
.
d. If you set the
value as “0”, the production won’t stop by production target.
