5
Pin 5
Pin 9
Pin 1
Pin 6
External
Power
Serial
USB
WARNING
: BE CERTAIN TO REMEMBER THE PASSWORD.
The only way to recover from a forgotten password is to perform a
Clean Boot and you will LOSE all application software, licenses,
settings and data on your unit. See page 9 on how to perform a
Clean Boot.
9. Using the CF expansion slots
If your unit comes with CompactFlash (CF) slots, use a small #1
Philips head screwdriver to unscrew the two screws on the top of
the CF-Cap
TM
and remove the cap.
Gently insert a CF card or other device
into one of the CF slots. Make sure the
front of the card faces the display side of
the unit.
Do not force the card into the
slot.
The pins can be damaged if the
card is not aligned correctly. CF slot #1 supports Type I & II cards.
CF slot #2 supports Type I cards. Replace the CF-Cap and securely
tighten the screws.
NOTE:
DO NOT use the unit without reattaching the CF-Cap. The
unit is NOT sealed when the CF-Cap is off and water damage can
occur, possibly voiding the warranty.
10. I/O ports
The unit has USB and 9-pin serial
ports. Connections via USB to a PC
require an A-B USB cable (included
with the unit). Serial connections
require a 9-pin null-modem serial cable
(not included with the unit).
You may also increase your connectivity options with CF cards.
CF slot #2
Type I
CF slot #1
Type I & II
