19
or even from a PC. Files saved on storage cards before enabling
encryption will not be encrypted.
NOTE
: if you perform a Clean Boot on your unit, previously
encrypted files on storage cards will no longer be readable by that
unit or by any other device, including PCs.
Backlight
Tap
System / Backlight
. Tap
Battery Power
,
External Power
and
Brightness
tabs to change settings.
Memory
Tap
System / Memory
to see how much Storage memory (Flash)
and Program memory (RAM) is available. Closing programs still
leaves them resident in RAM. As more programs are started,
available RAM decreases. If RAM resources become low, you can
stop programs and remove them from RAM. First, ensure you have
saved all your data. To stop a program, tap the tab
Running
Programs
. You can stop individual programs or tap
Stop All
.
Power
Tap
System / Power
to view the approximate battery power
remaining in 20% increments.
This gauge may be inaccurate after
first turning the unit on, or inserting or removing the external AC
adapter. The battery driver constantly gathers information about the
battery voltage and history and uses this information to report a
charge level. It can take up to 30 minutes for the battery driver to
gather enough information to more accurately report the charge
level. Tap the
Advanced
tab and choose the settings for
automatically turning off the unit when not in use.
Screen
Tap
System / Screen
. The orientation can be changed to landscape
for some programs that are not screen aware. To change the size of
the text on the screen, tap
Text Size
to see more content or increase
the readability in many programs.
System Information
Tap System / System Information. Unit information can be found here including
firmware version, serial number, processor speed, RAM and Flash size, plus wireless and
battery information.
