3
Unit Setup
1. Charge the PowerBoot Module
The PowerBoot Module
TM
that contains the batteries is shipped
detached from the unit. Before you insert the PowerBoot into the
unit, you should charge it. If the AC adapter that came with your
unit has multi-national plugs, connect the appropriate AC plug for
your country to the AC adapter. Plug into an
electrical outlet and plug the barrel end of the
AC adapter into the PowerBoot. Charge at
least 12 hours before using.
Warning!
Be sure to only use the AC adapter included with your
unit. Use of other adapters will void the product warranty.
2. Attach the PowerBoot Module
To attach the PowerBoot, use a
screwdriver or the flat head of the supplied
stylus to turn the latches counter-clockwise
until the arrows point downward towards
the I/O ports on the PowerBoot. While
applying pressure down and forward on
the PowerBoot, firmly slide it onto the
main unit as shown.
Lock the PowerBoot latches by turning
them clockwise one half turn until the
arrows on the latches point away from the
I/O ports.
3. Attach the hand strap
Hold the hand strap clip at a 45-degree angle
and push the clip onto the bracket. Repeat the
process with the other end of the hand strap.
latches