background image

 

26 

Regulatory Information 

U.S.A. 

This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more 
of the following measures:  

- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver. 
- Connect the equipment to an outlet on a circuit different from that to 

which the receiver is connected.  

- Consult the dealer or an experienced radio/TV technician for help. 

 

Canada 

This digital apparatus does not exceed the Class B limits for radio noise 
emissions from digital apparatus as set out in the radio interference regulations 
of the Canadian Department of Communications. Le présent appareil 
numérique n’émet pas de bruits radioélectriques dépassant les limites 
applicables aux appareils numériques de Classe B prescrites dans le règlement 
sur le brouillage radioélectrique édicté par le Ministère des Communications 
du Canada. 

Korea 

For users in Korea the power supply must have the “ek” mark (a Korean safety 
requirement) and can be purchased separately. 
 
The ratings are: 5 Volts, 4 Amps. 
Connector - Center positive standard 2.5 mm DC power connector. 
 

Summary of Contents for Recon

































Reviews: