SW-000103
Document Number: SW-000103
Page 45 of 51
Revision: 1.1
14
DEVICE POWER AND RESET
The SmartBug board can be reset or powered down in the
Device Power
window by using the
Power Down
or
Reset
button. The
Power Down
feature is required to connect the WiFi Add-On board with the module. Hot
plugging should be avoided while the module is running. There are two methods to turn on the module after
power down:
1.
Once the Add-On board is connected in
Power Down
mode, use the
Power
button on the Add-On card to
turn on the module.
2.
Once the Add-On board is connected in
Power Down
mode, connect the USB cable to turn on the module
and remove the USB cable to enable BLE mode.
