SW-000103
Document Number: SW-000103
Page 39 of 51
Revision: 1.1
ENABLE ULTRASONIC LOG
To enable the Ultrasound, you must change the line starting with
ULTRASOUND
and change
DISABLE
to
ENABLE
.
You can change some parameters. The format is:
ULTRASOUND <ENABLE/DISABLE> <ODR>
ULTRASOUND ODR in Hz can be set to 1, 5, or 10
ENABLE APEX FEATURE LOG
To enable the APEX feature, you must change the line starting with
APEX
and change
DISABLE
to
ENABLE
.
You can change some parameters. The format is:
APEX <ENABLE/DISABLE> <TAP_TMIN> <TAP_TMAX> <TAP_MIN_JERK_THR> <PED_STEP_CNT_TH>
<PED_AMP_CNT_TH> <WOM_THR>
TAP_TMIN
TAP_TMAX
TAP_MIN_JERK_THR
(UNIT: 16MG))
PED_STEP_CNT_TH PED_AMP_TH_SEL
WOM_THR
(UNIT: 4MG)
0 : 125 ms
1 : 140 ms
2 : 156 ms
3 : 171 ms
4 : 187 ms
5 : 203 ms
6 : 218 ms
7 : 234 ms
0 : 250 ms
32 : 375 ms
64 : 500 ms
96 : 625 ms
0 <= th <= 63
0 <= th <= 15
0 : 1006632 µG
16 : 1140650 µG
32 : 1275068 µG
48 : 1409286 µG
64 : 1543503 µG
80 : 1677721 µG
96 : 1811939 µG
112 : 1946157 µG
128 : 2080374 µG
144 : 2214592 µG
160 : 2348810 µG
176 : 2483027 µG
192 : 2617245 µG
208 : 2751463 µG
224 : 2885681 µG
240 : 3019898 µG
0 < th < 255
