SW-000103
Document Number: SW-000103
Page 36 of 51
Revision: 1.1
11
STANDALONE SD CARD LOGGER
Note
: SD Card should be on a FAT32 file system with maximum size of 32GB
ENABLE AUTONOMOUS SD CARD LOG WITHOUT THE SMARTBUG APP
1.
Connect the SmartBug USB to a PC.
2.
A Disk will mount on Windows. On the disk you have a file called
CONFIG.TXT
.
3.
Edit this file with a text editor:
4.
After changing the configuration, close the file, and disconnect the USB.
5.
You can start the SD Card logging by pushing the
SW2000
button for 2 seconds. LED 1 on the Add-On
Board will start to blink every 3 seconds.
6.
You can tag an event by pushing the
SW2000
button.
7.
When you want to stop the log, push the
SW2000
button for 2 seconds.
8.
You can restart a new log or connect the SmartBug USB to the USB to access your log files.
ENABLE ACCELEROMETER LOG
To enable the accelerometer, you must change the line starting with
ACCEL
and change
DISABLE
to
ENABLE
.
You can change some parameters. The format is:
ACCEL <ENABLE/DISABLE> <ODR> <FSR>
Accelerometer ODR in Hz can be set to 25, 50, or 100
Accelerometer FSR : 0 : 2G / 1 : 4G / 2 : 8G / 3 : 16G